Configuration Changes Drive Object / Config_Chng Do - Siemens SINAMICS DCM List Manual

2 Parameters
2.2 List of parameters
Dependency: Refer to: r7867, r7871
Note: Re index 0:
When changing one of the following indices, then the value in this index is incremented.
Re index 1:
Drive object configuration. When changing r7871[0] on a drive object, the value in this index is incremented.
Re index 2:
Drive object, configuration unit. When changing either p0101 or r0102, the value in this index is incremented.
Re index 3:
PROFIBUS configuration unit. When changing p0978, the value in this index is incremented.
Re index 4:
DRIVE-CLiQ actual topology. When changing either r9900 or r9901, the value in this index is incremented.
Re index 5:
DRIVE-CLiQ target topology. When changing either p9902 or p9903, the value in this index is incremented.
Re index 6:
DRIVE-CLiQ sockets. When changing p0109, the value in this index is incremented.
Re index 7:
OA applications. When changing OA applications, the value in this index is incremented.
r7871[0...15]

Configuration changes drive object / Config_chng DO

CU_DC, CU_DC_R, Can be changed: -
CU_DC_R_S,
Data type: Unsigned32
CU_DC_S, TM150,
P-Group: -
TM15DI_DO, TM31
Not for motor type: -
Min
-
Description: Displays the configuration changes on the drive object.
Index: [0] = Sum of the following indices
[1] = p0010, p0107, p0108
[2] = Drive object name (p0199)
[3] = Structure-relevant parameters (e.g. p0180)
[4] = BICO interconnections
[5] = Activate/de-activate drive object
[6] = Data backup required
[7] = Reserved
[8] = Reference or changeover parameters (e.g. p2000)
[9] = Parameter count through Drive Control Chart (DCC)
[10] = p0107, p0108
[11] = Reserved
[12] = Write protection and know-how protection status
[13] = Reserved
[14] = Reserved
[15] = Reserved
Dependency: Refer to: r7868, r7870
Note: Re index 0:
When changing one of the following indices, then the value in this index is incremented.
Re index 1:
Drive object commissioning: When changing p0010, p0107 or p0108, the value in this index is incremented.
Re index 2:
Drive object name. When changing p0199, the value in this index is incremented.
Re index 3:
Drive object structure. When changing a parameter that is relevant for the structure (e.g. number of data sets), the
value in this index is incremented.
Re index 4:
Drive object BICO interconnections. When changing r3977, the value in this index is incremented.
Re index 5:
Drive object activity: When changing p0105, the value in this index is incremented.
308
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
List Manual (LH8), 02/2015, 6RX1800-0ED76
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
SINAMICS DCM