Alarm Value For Float Values / Alarm Value Float; Co/Bo: Status Word Faults/Alarms 2 / Zsw Fault/Alarm 2; Fault Time Removed In Days / T_Flt Resolv Days - Siemens SINAMICS DCM List Manual

2 Parameters
2.2 List of parameters
r2134[0...63]

Alarm value for float values / Alarm value float

All objects Can be changed: -
Data type: FloatingPoint32
P-Group: Messages
Not for motor type: -
Min
-
Description: Displays additional information about the active alarm for float values.
Dependency: Refer to: r2110, r2122, r2123, r2124, r2125, r2145, r2146, r3121, r3123
Note: The buffer parameters are cyclically updated in the background (refer to status signal in r2139).
r2135.0...2

CO/BO: Status word faults/alarms 2 / ZSW fault/alarm 2

CU_DC, CU_DC_R, Can be changed: -
CU_DC_R_S,
Data type: Unsigned16
CU_DC_S
P-Group: Displays, signals
Not for motor type: -
Min
-
Description: Display and BICO output for the second status word of faults and alarms.
Bit field: Bit
00
01
02
r2135.0...15 CO/BO: Status word faults/alarms 2 / ZSW fault/alarm 2
DC_CTRL, Can be changed: -
DC_CTRL_R,
Data type: Unsigned16
DC_CTRL_R_S,
P-Group: Displays, signals
DC_CTRL_S, TM150,
Not for motor type: -
TM15DI_DO, TM31
Min
-
Description: Display and BICO output for the second status word of faults and alarms.
Bit field: Bit
00
01
02
12
13
14
15
r2136[0...63]

Fault time removed in days / t_flt resolv days

All objects Can be changed: -
Data type: Unsigned16
P-Group: Messages
Not for motor type: -
Min
-
Description: Displays the system runtime in days when the fault was removed.
Dependency: Refer to: r0945, r0947, r0948, r0949, r2109, r2114, r2130, r2133, r3115, r3120, r3122
Notice: The time comprises r2136 (days) and r2109 (milliseconds).
Note: The buffer parameters are cyclically updated in the background (refer to status signal in r2139).
178
Signal name
Fault encoder 1
Fault encoder 2
Fault encoder 3
Signal name
Fault encoder 1
Fault encoder 2
Fault encoder 3
Fault motor overtemperature
Fault power unit thermal overload
Alarm motor overtemperature
Alarm power unit thermal overload
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
1 signal
Yes
Yes
Yes
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
1 signal
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
List Manual (LH8), 02/2015, 6RX1800-0ED76
Access level: 3
Func. diagram: 8065
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 2
Func. diagram: 2548
Unit selection: -
Expert list: 1
Factory setting
-
0 signal
No
No
No
Access level: 2
Func. diagram: 2548
Unit selection: -
Expert list: 1
Factory setting
-
0 signal
No
No
No
No
No
No
No
Access level: 3
Func. diagram: 8060
Unit selection: -
Expert list: 1
Factory setting
-
SINAMICS DCM
FP
-
-
-
FP
-
-
-
8016
8014
8016
8014