Profinet Name Of Station / Pn Name Of Station; Profinet Ip Of Station / Pn Ip Of Station - Siemens SINAMICS DCM List Manual

Bit field: Bit
00
01
Dependency: Refer to: p51790
r61000[0...239]

PROFINET Name of Station / PN Name of Station

CU_DC (PROFINET Can be changed: -
CBE20), CU_DC_R
Data type: Unsigned8
(PROFINET CBE20),
P-Group: -
CU_DC_R_S
Not for motor type: -
(PROFINET CBE20),
CU_DC_S
Min
(PROFINET CBE20)
-
Description: Displays PROFINET Name of Station.
Notice: An ASCII table (excerpt) can be found, for example, in the appendix to the List Manual.
r61001[0...3]

PROFINET IP of Station / PN IP of Station

CU_DC (PROFINET Can be changed: -
CBE20), CU_DC_R
Data type: Unsigned8
(PROFINET CBE20),
P-Group: -
CU_DC_R_S
Not for motor type: -
(PROFINET CBE20),
CU_DC_S
Min
(PROFINET CBE20)
-
Description: Displays PROFINET IP of Station.
SINAMICS DCM
List Manual (LH8), 02/2015, 6RX1800-0ED76
Signal name
Power unit topology 1
Power unit topology 2
1 signal
Requested
Requested
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
2 Parameters
2.2 List of parameters
0 signal
Not requested
Not requested
Access level: 3
Func. diagram: 2410
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: 2410
Unit selection: -
Expert list: 1
Factory setting
-
FP
9360
9360
645