Xist1_Erw Reset Mode / Xist1_Erw Res Mode; Co: Xist1_Erw Actual Value / Xist1_Erw Actval - Siemens SINAMICS DCM List Manual

0 ... 25 %:
The function limit has been reached. A service is recommended.
26 ... 100 %:
The encoder is working in the specified range.
Index: [0] = Function reserve 1
[1] = Function reserve 2
[2] = Function reserve 3
[3] = Function reserve 4
Dependency: Refer to: p4650
Note: Value = 999 means:
- the component specified in p4650 is not connected
- the encoder does not support the display of the functional reserve
p4652[0...2]

XIST1_ERW reset mode / XIST1_ERW res mode

DC_CTRL, Can be changed: C1(3)
DC_CTRL_R,
Data type: Integer16
DC_CTRL_R_S,
P-Group: -
DC_CTRL_S
Not for motor type: -
Min
0
Description: Sets the mode to reset the actual value in XIST_ERW (CO: r4653).
Value: 0:
1:
2:
3:
Index: [0] = Encoder 1
[1] = Encoder 2
[2] = -
Dependency: Refer to: r4653, r4654, p4655
Note: If value = 1:
The value in XIST1_ERW is reset when passing every zero mark.
If value = 2:
The value in XIST1_ERW is reset with a 0/1 edge via binector input p4655.
If value = 3:
The value in XIST1_ERW is reset after a 0/1 edge via binector input p4655 when passing the next zero mark.
r4653[0...2]

CO: XIST1_ERW actual value / XIST1_ERW actval

DC_CTRL, Can be changed: -
DC_CTRL_R,
Data type: Unsigned32
DC_CTRL_R_S,
P-Group: Encoder
DC_CTRL_S
Not for motor type: -
Min
-
Description: Display and connector output for the actual value XIST1_ERW.
Index: [0] = Encoder 1
[1] = Encoder 2
[2] = -
Dependency: Refer to: p4652, r4654, p4655
SINAMICS DCM
List Manual (LH8), 02/2015, 6RX1800-0ED76
Inactive
Reset with zero mark
Reset with BICO
Reset with selected zero mark
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
3
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
2 Parameters
2.2 List of parameters
Access level: 3
Func. diagram: 4750
Unit selection: -
Expert list: 1
Factory setting
0
Access level: 3
Func. diagram: 4750
Unit selection: -
Expert list: 1
Factory setting
-
251