Torque Limiting Torque Limit 1 Positive / T Lim 1 Pos; Torque Limiting Torque Limit 1 Negative / T Lim 1 Neg; Torque Limiting Torque Limit 2 Positive / T Lim 2 Pos; Torque Limiting Torque Limit 2 Negative / T Lim 2 Neg - Siemens SINAMICS DCM List Manual

2 Parameters
2.2 List of parameters
p50180[0...n]

Torque limiting torque limit 1 positive / T lim 1 pos

DC_CTRL Can be changed: C2(1), U, T
Data type: FloatingPoint32
P-Group: -
Not for motor type: -
Min
-300.00 [%]
Description: Sets positive torque limit 1.
Dependency: Refer to: p50182
Note: If torque limit changeover is selected (p50694 = 1) and the speed is higher than the set changeover speed (p50184),
then torque limit 2 is activated in place of torque limit 1.
p50181[0...n]

Torque limiting torque limit 1 negative / T lim 1 neg

DC_CTRL Can be changed: C2(1), U, T
Data type: FloatingPoint32
P-Group: -
Not for motor type: -
Min
-300.00 [%]
Description: Sets negative torque limit 1.
Dependency: Refer to: p50183
Note: If torque limit changeover is selected (p50694 = 1) and the speed is higher than the set changeover speed (p50184),
then torque limit 2 is activated in place of torque limit 1.
p50182[0...n]

Torque limiting torque limit 2 positive / T lim 2 pos

DC_CTRL Can be changed: U, T
Data type: FloatingPoint32
P-Group: -
Not for motor type: -
Min
-300.00 [%]
Description: Sets positive torque limit 2.
Dependency: Refer to: p50180
Note: If torque limit changeover is selected (p50694 = 1) and the speed is higher than the set changeover speed (p50184),
then torque limit 2 is activated in place of torque limit 1.
p50183[0...n]

Torque limiting torque limit 2 negative / T lim 2 neg

DC_CTRL Can be changed: U, T
Data type: FloatingPoint32
P-Group: -
Not for motor type: -
Min
-300.00 [%]
Description: Sets negative torque limit 2.
Dependency: Refer to: p50181
Note: If torque limit changeover is selected (p50694 = 1) and the speed is higher than the set changeover speed (p50184),
then torque limit 2 is activated in place of torque limit 1.
418
Calculated: -
Dyn. index: DDS, p0180
Unit group: -
Scaling: PERCENT
Max
300.00 [%]
Calculated: -
Dyn. index: DDS, p0180
Unit group: -
Scaling: PERCENT
Max
300.00 [%]
Calculated: -
Dyn. index: DDS, p0180
Unit group: -
Scaling: PERCENT
Max
300.00 [%]
Calculated: -
Dyn. index: DDS, p0180
Unit group: -
Scaling: PERCENT
Max
300.00 [%]
List Manual (LH8), 02/2015, 6RX1800-0ED76
Access level: 1
Func. diagram: 6825
Unit selection: -
Expert list: 1
Factory setting
300.00 [%]
Access level: 1
Func. diagram: 6825
Unit selection: -
Expert list: 1
Factory setting
-300.00 [%]
Access level: 2
Func. diagram: 6825
Unit selection: -
Expert list: 1
Factory setting
300.00 [%]
Access level: 2
Func. diagram: 6825
Unit selection: -
Expert list: 1
Factory setting
-300.00 [%]
SINAMICS DCM