Table of Contents
Advertisement
4 Keypad and Display
4.3
Working Examples
4.3.1
Example: Changing the status
"Protected mode" <−> "Configuration mode"
Menu structure:
AS-i Line 1 > Line status >
Procedure
Initial status: The "AS-i" logo is displayed.
1. Press any button.
Result: The main menu is displayed, "SYSTEM" is selected.
2. Press three times
The "AS-i Line 1" entry is selected.
(Entry for a single master: "AS-i Line")
3. Press
The "Lifelist" entry is selected.
4. Press three times
The "Line status" entry is selected.
5. Press
The "Protected" entry is selected.
The check box on the right of the row can have the following statuses:
− Check box selected (with check mark):
The module is in protected mode.
− Check box not selected (empty):
The module is in configuration mode.
6. Press
The module changes to the other mode.
As soon as you set or clear a check mark, the change is saved.
7. Press
You return to the menu structure to the "Line status" entry.
IE/AS−INTERFACE LINK PN IO
42
Protected >
:
:
:
:
:
:
as of hardware version 1, as of firmware version V2.0
Changing between "Protected mode" /
"Configuration mode"
C79000−G8976−C216−03
Release 08/2018
Advertisement
Table of Contents
