Changing The Oem's Password - Siemens LME39 Series Basic Documentation

/reset
/reset
/reset
58/73
Building Technologies Division
19.3

Changing the OEM's password

Basic Documentation LME39...
19 Parameter level
Parameter 042: flashes.
to go to level c: for password changes.
Press
/reset
Letter c: for confirmation appears flashing.
Proceed as described in section Entering the password
and enter the former password.
After entry of the last character, the password must be
confirmed by pressing
/reset
Letter n: for new appears flashing.
Proceed as described in section Entering the password
and enter the new password (5 characters).
After entry of the last character, the password must be
confirmed by pressing
/reset
Letter r: for repeat appears flashing.
Proceed as described in section Entering the password
and repeat entry of the new password.
After entry of the last character, the password must be
confirmed by pressing
/reset
SEt confirms that the new password has been saved.
Parameter 042: flashes again.
.
.
.
CC1P7106en
08.12.2017