26.4 Change of OEM's password
/reset
/reset
146/219
Building Technologies
Basic Documentation LMV27...
26 Parameter level
Parameter 042: flashes.
Press
to go to level c: for password changes.
/reset
Letter n: for new appears flashing.
Proceed as described in chapter Entry of password and
enter the new password (5 characters).
After entry of the last character, the password must be
confirmed by pressing
/reset
Letter r: for repeat appears flashing.
Proceed as described in chapter Entry of password and
repeat entry of the new password.
After entry of the last character, the password must be
confirmed by pressing
/reset
SEt confirms that the new password has been saved.
Parameter 042: flashes again.
.
.
CC1P7541en
17.12.2018