Show - HP ProCurve 5400zl Reference Manual

OVERVIEW
Category:
Primary context:
Related Commands
Usage: show ...
Description: Display switch operation information.
COMMAND STRUCTURE

■ show

access-list
acl-name
■
config
■
(p. 540)
config -- Show all configured ACL's on the switch using the CLI syntax used to create them.
■
(p. 540)
ports -- Show ACLs applied to the specified ports. ([ethernet] PORT-LIST)
■
radius -- Display ACLs applied via RADIUS. ([ethernet] PORT-LIST)
■
resources
■
vlan -- Show ACLs applied to the specified VLAN. (VLAN-ID)
■
■ show accounting
sessions
■
■ show alias -- Show configured alias commands
■ show arp -- Show the IP ARP translation table
vlan -- Specify VLAN for which to show ARP entries. (VLAN-ID)
■
■ show arp-protect
statistics
■
■ show authentication
■ show authorization
■ show autorun
■ show bandwidth
533)
output -- Show outbound guaranteed minimum bandwidth.
■
port-list
■
578)
■ show banner
motd -- show the configured banner text
■
■ show boot-history
■ show cdp -- Show CDP configuration and neighbors discovered
neighbors
■
detail
■
neighbors-port
■
574)
■ show class
ipv4 -- Enter ipv4 class. (ASCII-STR)
■
ipv6 -- Enter ipv6 class. (ASCII-STR)
■
© 2009 Hewlett-Packard Development Company, L.P.
operator
The 'show' must be followed by a command.
Use 'show ?' for the list of all possible command.
-- Show Access Control List information
-- Display detailed information on specified ACL. (ASCII-STR)
-- Show all configured ACL's on the switch using the CLI syntax used to create them.
-- Display ACL Rules/Masks availability.
-- Show Accounting configuration parameters
-- Show accounting data for all active sessions
-- Display Dynamic ARP Protection information
-- (VLAN-ID-RANGE)
-- Show Authentication configuration parameters
-- Show Authorization configuration parameters
-- Show Autorun configuration status.
-- Show queue percentages for outbound guaranteed minimum bandwidth
-- Specify ports for which information will be shown. ([ethernet] PORT-LIST)
-- show the configured banner text
-- Display the system boot log
-- Show CDP neighbors. See 'show cdp help' for details.
-- Show neighbor information field-per-line instead of shortened table format.
-- Show CDP neighbors on specified port only. ([ethernet] PORT-NUM)
-- Show class config. (p. 537)
(p. 585)
(p. 529)
(p. 530)
(p. 594)
(p. 533)
(p. 533)
(p. 571)
(p. 534)
(p. 562)
(p. 562)
(p. 527)
(p. 528)
(p. 580)
(p. 583)
(p. 603)
(p. 528)
(p. 590)
(p. 603)
(p. 530)
(p. 531)
(p. 531)
(p. 575)
(p. 537)
(p. 573)
show
(p.
(p.
(p. 546)
(p.
511