Command Line Interface Reference Guide
client-public-key
■
babble
■
fingerprint
■
dns
-- Show configured DNS server IP addresses on the switch
■
forward-protocol
■
are to be forwarded based on configured port
vlan
-- Specify a vlan for which to show server addresses. (VLAN-ID)
■
helper-address
■
forwarded
vlan
-- Specify a vlan for which to show server addresses. (VLAN-ID)
■
host-public-key
■
babble
■
fingerprint
■
icmp
-- Show ICMP Rate Limiting settings
■
igmp
-- Invoked without any parameters, shows per-VLAN IGMP status, or, if VLANs are disabled
■
displays the global IGMP status
config
■
group
■
553)
vlan
-- Show IGMP operational information for the VLAN specified. (VLAN-ID)
■
config
■
irdp
-- Show IRDP (ICMP Router Discovery Protocol) settings
■
mroute
-- Show IP multicast routing table
■
interface
■
VLAN-ID
■
(p. 607)
IP-ADDR
■
table (IP-ADDR)
IP-ADDR
■
ospf
-- Show OSPF operational and configuration information
■
area
■
area-ip
■
external-link-state
■
which the device is attached
advertise
■
link-state-id
■
router-id
■
sequence-number
■
status
■
general
■
interface
■
if-ip
■
(IP-ADDR)
vlan
■
(p. 603)
link-state
■
device is attached
advertise
■
area-id
■
link-state-id
■
router-id
■
sequence-number
■
status
■
© 2009 Hewlett-Packard Development Company, L.P.
-- Show currently loaded public keys for authorized clients (NUMBER)
-- Display phonetic hash.
-- Display hexadecimal hash.
-- Show server addresses where broadcast requests received by the switch
-- Show DHCP servers where DHCP requests received by the switch are to be
(p. 555)
-- Display the SSH host RSA public key (NUMBER)
-- Display phonetic hash.
-- Display hexadecimal hash.
-- Show IGMP configuration information.
-- Show ports the specified multicast group address is registered on. (IP-ADDR)
-- Show IGMP configuration information for the VLAN specified.
-- Show IP multicast routing interfaces' information
-- Specify the VLAN ID of the IP multicast routing interface to show. (VLAN-ID)
-- Show detailed information for the specified entry from the IP multicast routing
(p. 562)
-- Specify the source IP address of the MRT entry. (IP-ADDR)
-- Show OSPF areas configured on the device
-- (OSPF-AREA-ID)
-- Show the Link State Advertisements from throughout the areas to
-- Show each LSA as a stream of bytes in hexadecimal notation.
-- Show LSAs with the specified ID only. (IP-ADDR)
-- Show LSAs with the specified Router ID only. (IP-ADDR)
-- Show LSAs with the specified sequence number only.
-- The keyword is optional and can be omitted.
-- Show OSPF basic configuration and operational information
-- Show OSPF interfaces' information
-- Specify IP address of the interface for which to show detailed information.
(p. 556)
-- Specify VLAN of the interface for which to show detailed information. (VLAN-ID)
-- Show all Link State Advertisements from throughout the areas to which the
(p. 565)
-- Show each LSA as a stream of bytes in hexadecimal notation.
-- Show LSAs for the specified area only. (OSPF-AREA-ID)
-- Show LSAs with the specified ID only. (IP-ADDR)
-- Show LSAs with the specified Router ID only. (IP-ADDR)
-- Show LSAs with the specified sequence number only.
-- The keyword is optional and can be omitted.
(p. 533)
(p. 552)
(p. 552)
(p. 533)
(p. 552)
(p. 556)
(p. 556)
(p. 540)
(p. 571)
(p. 529)
(p. 530)
(p. 550)
(p. 559)
(p. 549)
(p. 603)
(p. 603)
(p. 555)
(p. 603)
(p. 540)
(p. 563)
(p. 559)
(p. 562)
(p. 574)
(p. 529)
(p. 566)
(p. 587)
(p. 589)
(p. 596)
(p. 553)
(p. 529)
(p. 530)
(p. 566)
(p. 587)
(p. 589)
(p. 596)
show
(p. 537)
(p.
514