HP ProCurve 5400zl Reference Manual page 306

Command Line Interface Reference Guide
Usage: ip load-sharing <2-4>
no ip load-sharing
Description: Specify the maximum number of equal cost IP load sharing
Range: < 2 to 4 >
mac
■ [no] ip ssh mac < hmac-md5 | hmac-sha1 | hmac-sha1-96 | ... >
Specify a mac to enable/disable.
Supported Values:
■ hmac-md5
■ hmac-sha1
■ hmac-sha1-96
■ hmac-md5-96
■ ip source-binding VLAN-ID IP-ADDR MAC-ADDR
Next Available Option:
interface
■
manual
■ ip timep manual
Manually configure the Timep server address.
Next Available Options:
server -- Timep server IPv4 address. (IP-ADDR)
■
serverV6
■
multicast-routing
■ [no] ip multicast-routing
Usage: [no] ip multicast-routing
Description: Enable/disable IP multicast routing on the device.
name
■ [no] ip access-list extended NAME
Specify name of Access Control List to configure.
■ [no] ip access-list standard NAME
Specify name of Access Control List to configure.
■ ip access-list resequence NAME
Specify name of Access Control List to configure.
© 2009 Hewlett-Packard Development Company, L.P.
paths. no ip load-sharing disables IP load sharing.
-- ([ethernet] PORT-NUM)
-- Timep server IPv6 address. (IPV6-ADDR)
(p. 301)
(p. 308)
(p. 308)
ip
304