HP ProCurve 5400zl Reference Manual page 586

Command Line Interface Reference Guide
Next Available Options:
authentication
■
accounting
■
dyn-authorization
■
host -- Show statistics information for the RADIUS host (IP-ADDR)
■
rate-limit
■ show rate-limit
Usage: show rate-limit all [PORT-LIST] [detailed]
show rate-limit ip access-group [PORT-LIST]
show rate-limit icmp [PORT-LIST]
show rate-limit bcast [PORT-LIST] [detailed]
show rate-limit mcast [PORT-LIST] [detailed]
Description: Show rate limit maximum percentages. If PORT-LIST parameter is
Next Available Options:
icmp -- Show only limits for icmp
■
all -- Show limits for all
■
bcast -- Show limits for ingress broadcast
■
mcast -- Show limits for ingress multicast
■
receiver-index
■ show sflow < 1 to 3 >
Select one of the three possible sFlow receiver tables.
Range: < 1 to 3 >
Next Available Options:
destination
■
the sampling-polling data is
sampling-polling
■
redistribute
■ show ip ospf redistribute
Usage: show ip ospf redistribute
Description: List protocols which are being redistributed into OSPF.
■ show ip rip redistribute
© 2009 Hewlett-Packard Development Company, L.P.
-- Show RADIUS authentication
-- Show RADIUS accounting
-- Show RADIUS dynamic authorization
specified, information is shown only for the specified ports.
Use 'all' to show limits applied to all traffic.
Use 'ip' to show limits applied to access control lists.
Use 'icmp' to show limits for ICMP traffic.
Use 'bcast' to show limits for Broadcast traffic.
Use 'mcast' to show limits for Multicast traffic.
Use 'detailed' to show Inbound Radius Override details.
traffic.(p. 529)
-- Displays information about the receiver/collector/management-station to which
sent.(p. 546)
-- Displays information about sampling and
statistics(p. 531)
statistics(p. 528)
traffic.(p. 556)
traffic.(p. 534)
traffic.(p. 569)
statistics(p. 549)
(p. 555)
polling.(p. 589)
show
584