HP ProCurve 5400zl Reference Manual page 427

Command Line Interface Reference Guide
ipv4
■ qos < udp-port | tcp-port > ipv4
Specify range of TCP/UDP ports from [to] which to prioritize traffic.
Next Available Options:
port-num
■
range -- Specify range of TCP/UDP ports from [to] which to prioritize
■
ipv4/mask
■ [no] qos device-priority IP-ADDR/mask-LENGTH
specify the ipv4 address with subnet mask of the device to set the priority
Next Available Options:
dscp -- Specify DSCP policy to use.
■
priority < 0 | 1 | 2 | ... > -- Specify priority to use.
■
ipv6
■ [no] qos device-priority IPV6-ADDR
specify the ipv6 address of the device to set the priority
Next Available Options:
dscp -- Specify DSCP policy to use.
■
priority < 0 | 1 | 2 | ... > -- Specify priority to use.
■
■ qos < udp-port | tcp-port > ipv6
Specify range of TCP/UDP ports from [to] which to prioritize traffic.
Next Available Options:
port-num
■
range -- Specify range of TCP/UDP ports from [to] which to prioritize
■
ipv6/mask
■ [no] qos device-priority IPV6-ADDR/PREFIX-LEN
specify the ipv6 address with prefix-length of the device to set the priority
Next Available Options:
dscp -- Specify DSCP policy to use.
■
priority < 0 | 1 | 2 | ... > -- Specify priority to use.
■
max-port-num
■ [no] qos < udp-port | tcp-port > range TCP/UDP-PORT TCP/UDP-PORT
Maximal TCP/UDP port in the range from [to] which to prioritize traffic.
© 2009 Hewlett-Packard Development Company, L.P.
101
100
011
010
001
000
-- TCP/UDP port from [to] which to prioritize traffic. (TCP/UDP-PORT)
-- TCP/UDP port from [to] which to prioritize traffic. (TCP/UDP-PORT)
5
4
3
0 (Normal)
2 (Low)
1 (Lowest)
(p. 418)
(p. 428)
(p. 418)
(p. 428)
(p. 418)
(p. 428)
qos
(p. 427)
traffic.(p. 432)
(p. 427)
traffic.(p. 432)
425