Command Line Interface Reference Guide
Next Available Option:
USER-NAME
■
USER-NAME
■ show snmpv3 user USER-NAME
Show a specific user.
ver1-2c
■ show snmpv3 access-rights < ManagerPriv | ManagerAuth | OperatorAuth | ... > sec-model <
ver1 | ver2c >
Configure SNMPv3 User entry.
Supported Values:
■ ver1 -- SNMP version 1 security model.
■ ver2c -- SNMP version 2c security model.
ver3
■ show snmpv3 access-rights < ManagerPriv | ManagerAuth | OperatorAuth | ... > sec-model ver3
SNMP version 3 security model.
Next Available Option:
ver3
< noauth | auth | priv > -- Set security level.
■
■ show snmpv3 access-rights < ManagerPriv | ManagerAuth | OperatorAuth | ... > sec-model ver3
< noauth | auth | priv >
Set security level.
Supported Values:
■ noauth -- no authentication (and no privacy)
■ auth -- authentication (no privacy)
■ priv -- authentication and privacy
version
■ show version
Usage: show version
Description: Show software version.
view
■ show snmpv3 view
Show views.
Next Available Option:
VIEW-NAME
■
■ show stack view
© 2009 Hewlett-Packard Development Company, L.P.
-- Show a specific user. (ASCII-STR)
-- Set view name. (ASCII-STR)
(p. 602)
(p. 602)
(p. 603)
show
602