HP ProCurve 5400zl Reference Manual page 119

Command Line Interface Reference Guide
Next Available Option:
cv_flash
■
■ copy usb flash
Copy data to the switch system image file.
Next Available Option:
image-name
■
■ copy flash
Copy the switch system image file.
Next Available Options:
flash < primary | secondary > -- Copy to primary/secondary
■
tftp -- Copy data to a TFTP
■
xmodem
■
usb -- Copy data to a USB flash
■
■ copy flash flash < primary | secondary >
Copy to primary/secondary flash.
Supported Values:
■ primary -- Copy to primary flash.
■ secondary -- Copy to secondary flash.
image-name
■ copy usb flash IMAGE-NAME
Specify filename for the USB transfer.
Next Available Option:
cv_flash
■
manager
■ copy tftp pub-key-file IP-ADDR FILENAME manager
Replace the key(s) for manager access; follow with the 'append' option to add the
key(s).
Next Available Option:
append
■
■ copy tftp pub-key-file IPV6-ADDR FILENAME manager
Replace the key(s) for manager access; follow with the 'append' option to add the
key(s).
Next Available Option:
append
■
© 2009 Hewlett-Packard Development Company, L.P.
< primary | secondary > -- Copy to primary/secondary
-- Specify filename for the USB transfer. (ASCII-STR)
server.(p. 124)
-- Use xmodem on the terminal as the data
< primary | secondary > -- Copy to primary/secondary
-- Add the key(s) for access.(p. 102)
-- Add the key(s) for access.(p. 102)
destination.(p. 135)
drive.(p. 133)
flash.(p. 107)
(p. 117)
flash.(p. 116)
flash.(p. 107)
copy
117