HP ProCurve 5400zl Reference Manual page 552

Command Line Interface Reference Guide
elected
■ show ip pim bsr elected
Show elected Bootstrap Router information.
enable
■ show snmpv3 enable
Show SNMPv3 status.
endpoint
■ show monitor endpoint
Remote mirroring destination configuration.
engineid
■ show snmpv3 engineid
Show switch's SNMP engineId.
entries
■ show igmp-proxy entries
Show all the currently active IGMP proxy entries.
event_class
■ show logging
Specify substring to match in log entry. See 'log help' for details.
Supported Values:
■ -M -- Major event class.
■ -P -- Performance event class.
■ -W -- Warning event class.
■ -I -- Information event class.
■ -D -- Debug event class.
external-link-state
■ show ip ospf external-link-state
Usage: show ip ospf external-link-state [status|advertise]
Description: Show the Link State Advertisements from throughout
Next Available Options:
status -- The keyword is optional and can be
■
advertise
■
link-state-id
■
© 2009 Hewlett-Packard Development Company, L.P.
the areas to which the device is attached. The command
shows only External Link State Advertisements.
The 'status' keyword is optional and does not affect the
command output. If the 'advertise' is specified, each LSA
is shown as a stream of bytes in hexadecimal notation.
-- Show each LSA as a stream of bytes in hexadecimal
-- Show LSAs with the specified ID only. (IP-ADDR)
omitted.(p. 596)
notation.(p. 529)
(p. 566)
show
550