HP ProCurve 5400zl Reference Manual page 312

Command Line Interface Reference Guide
Next Available Options:
filetransfer
■
port -- Specify the TCP port on which the daemon should listen for SSH
■
public-key
■
timeout
■
negotiation and authentication. (NUMBER)
cipher < aes128-cbc | 3des-cbc | aes192-cbc | ... > -- Specify a cipher to
■
mac < hmac-md5 | hmac-sha1 | hmac-sha1-96 | ... > -- Specify a mac to
■
standard
■ [no] ip access-list standard
Configure a standard Access Control List.
Next Available Options:
name -- Specify name of Access Control List to configure. (ASCII-STR)
■
number
■
start-seq-num
■ ip access-list resequence NAME < 1 to 2147483647 >
Specify the starting sequence number.
Range: < 1 to 2147483647 >
Next Available Option:
increment
■
© 2009 Hewlett-Packard Development Company, L.P.
function unless SSH is also enabled.
o 'port <<1-65535>|default>' - Set the TCP port on which the
daemon should listen for SSH connections. The default is 22.
o 'public-key <operator|manager> KEYSTRING' - set a key for
public-key authentication.
enclosed in quotes--either"KEYSTRING" or 'KEYSTRING'.
Newlines may be escaped with a backslash.
o 'ip-version <4|6|4or6>' - Select the IP mode to run in.
'ip-version 4' will only accept connections from IPv4
clients. 'ip-version 6' will only accept connections from
IPv6 clients. 'ip-version 4or6' accept connections from
both IPv4 and IPv6 clients. default is 'ip-version 4or6'.
o 'timeout <5-120>' - Set the maximum length of time in
seconds permitted for initial protocol negotiation and
authentication. The default is 120 seconds.
o 'cipher CIPHER' - Enable or disable the specified cipher.
By default, all available ciphers are enabled.
o 'mac MAC' - Enable or disable the specified mac.
all available macs are enabled.
-- Enable/disable secure file transfer
< manager | operator > -- Configure a client public-key. (NUMBER)
< 5 to 120 > -- Specify the maximum length of time (seconds) permitted for protocol
< 1 to 99 > -- Specify Access Control List to configure by number.
< 1 to 2147483646 > -- Specify the increment.
The KEYSTRING parameter must be
capability.(p. 299)
(p. 311)
(p. 301)
By default,
connections.(p. 305)
(p. 306)
enable/disable.(p. 296)
enable/disable.(p. 304)
(p. 304)
(p. 305)
ip
310