Overview - HP ProCurve 5400zl Reference Manual

OVERVIEW

Category:
Primary context:
Related Commands
Usage: [no] qos ...
Description: Configure Quality of Service (QoS) on the device. The
COMMAND STRUCTURE
■ [no] qos apptype
ip-all -- Specify range of TCP/UDP ports from [to] which to prioritize traffic.
■
port-num
■
dscp
■
■
■
■
priority
■
range
■
port-num
■
■
ipv4 -- Specify range of TCP/UDP ports from [to] which to prioritize traffic.
■
port-num
■
dscp
■
■
■
■
priority
■
range
■
port-num
■
■
© 2009 Hewlett-Packard Development Company, L.P.
QoS
config
show (page 511)
command must be followed by a keyword defining a subdomain
of the QoS parameters to configure.
< udp-port | tcp-port > -- Configure priorities for TCP/UDP services
-- TCP/UDP port from [to] which to prioritize traffic. (TCP/UDP-PORT)
< 000000 | 000001 | 000010 | ... > -- Specify DSCP policy to use.
binary-range < 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
integer-range < 0 to 63 > -- Specify the DSCP code-point in decimal.
well-defined < af11 | af12 | af13 | ... > -- Define mapping between a DSCP
(Differentiated-Services Codepoint) value and an 802
< 0 | 1 | 2 | ... > -- Specify priority to use.
-- Specify range of TCP/UDP ports from [to] which to prioritize traffic.
-- TCP/UDP port from [to] which to prioritize traffic. (TCP/UDP-PORT)
max-port-num -- Maximal TCP/UDP port in the range from [to] which to prioritize
traffic. (TCP/UDP-PORT)
dscp < 000000 | 000001 | 000010 | ... > -- Specify DSCP policy to use.
■
binary-range < 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
■
(p. 416)
integer-range < 0 to 63 > -- Specify the DSCP code-point in decimal.
■
well-defined < af11 | af12 | af13 | ... > -- Define mapping between a DSCP
■
(Differentiated-Services Codepoint) value and an 802
priority < 0 | 1 | 2 | ... > -- Specify priority to use.
■
-- TCP/UDP port from [to] which to prioritize traffic. (TCP/UDP-PORT)
< 000000 | 000001 | 000010 | ... > -- Specify DSCP policy to use.
binary-range < 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
integer-range < 0 to 63 > -- Specify the DSCP code-point in decimal.
well-defined < af11 | af12 | af13 | ... > -- Define mapping between a DSCP
(Differentiated-Services Codepoint) value and an 802
< 0 | 1 | 2 | ... > -- Specify priority to use.
-- Specify range of TCP/UDP ports from [to] which to prioritize traffic.
-- TCP/UDP port from [to] which to prioritize traffic. (TCP/UDP-PORT)
max-port-num -- Maximal TCP/UDP port in the range from [to] which to prioritize
traffic. (TCP/UDP-PORT)
dscp < 000000 | 000001 | 000010 | ... > -- Specify DSCP policy to use.
■
binary-range < 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
■
(p. 416)
integer-range < 0 to 63 > -- Specify the DSCP code-point in decimal.
■
(p. 428)
(p. 425)
(p. 428)
(p. 425)
(p. 415)
(p. 424)
(p. 427)
(p. 418)
(p. 423)
(p. 434)
(p. 432)
(p. 418)
(p. 434)
(p. 428)
(p. 425)
(p. 427)
(p. 418)
(p. 423)
(p. 434)
(p. 432)
(p. 418)
qos
(p. 416)
(p. 427)
(p. 423)
(p. 416)
(p. 427)
(p. 423)
411