Command Line Interface Reference Guide
Specify an OSPF area.
Next Available Options:
area-id
-- Single integer or IP address style dotted decimal. (OSPF-AREA-ID)
■
backbone
■
■ interface loopback < 0 to 7 > ip ospf all area
Specify an OSPF area.
Next Available Options:
area-id
-- Single integer or IP address style dotted decimal. (OSPF-AREA-ID)
■
backbone
■
■ interface vlan VLAN-ID ip ospf area
Specify an OSPF area.
Next Available Options:
area-id
-- Single integer or IP address style dotted decimal. (OSPF-AREA-ID)
■
backbone
■
■ interface vlan VLAN-ID ip ospf IP-ADDR area
Specify an OSPF area.
Next Available Options:
area-id
-- Single integer or IP address style dotted decimal. (OSPF-AREA-ID)
■
backbone
■
■ interface vlan VLAN-ID ip ospf all area
Specify an OSPF area.
Next Available Options:
area-id
-- Single integer or IP address style dotted decimal. (OSPF-AREA-ID)
■
backbone
■
area-id
■ interface loopback < 0 to 7 > ip ospf IP-ADDR area OSPF-AREA-ID
Single integer or IP address style dotted decimal.
■ interface loopback < 0 to 7 > ip ospf all area OSPF-AREA-ID
Single integer or IP address style dotted decimal.
■ interface vlan VLAN-ID ip ospf area OSPF-AREA-ID
Single integer or IP address style dotted decimal.
■ interface vlan VLAN-ID ip ospf IP-ADDR area OSPF-AREA-ID
© 2009 Hewlett-Packard Development Company, L.P.
-- The backbone area (the same as
-- The backbone area (the same as
-- The backbone area (the same as
-- The backbone area (the same as
-- The backbone area (the same as
0.0.0.0).(p. 226)
0.0.0.0).(p. 226)
0.0.0.0).(p. 226)
0.0.0.0).(p. 226)
0.0.0.0).(p. 226)
interface
(p. 222)
(p. 222)
(p. 222)
(p. 222)
(p. 222)
222