HP ProCurve 5400zl Reference Manual page 585

Command Line Interface Reference Guide
protocol-priority
■
tcp-udp-port-priority
■
type-of-service
■
vlan-priority
■
resources
■
queue-config
■
queue-config
■ show qos queue-config
Displays outbound port queues configuration information.
-r
■ show debug buffer -r
Display messages in reverse order (most recent first).
■ show logging -r
Display log events in reverse order (most recent first).
radio-ports
■ show wireless-services SLOT-ID radio-ports
Display radio-ports associated with a wireless-services module.
■ show lldp auto-provision radio-ports
Show LLDP radio-ports information.
radius
■ show access-list radius [ETHERNET] PORT-LIST
Display ACLs applied via RADIUS.
■ show radius
Usage: show radius [authentication|accounting|dyn-authorization|host <IP-ADDR>]
Description: Show RADIUS status and statistics information. Invoked without
o authentication - show RADIUS authentication statistics information.
o accounting
o dyn-authorization - show RADIUS dynamic authorization statistics
o host <IP-ADDR>
© 2009 Hewlett-Packard Development Company, L.P.
-- Show the protocol
-- Show TCP/UDP port
-- Show QoS priorities based on IP
-- Show the VLAN-based priority
-- Show the qos resources(p. 585)
-- Displays outbound port queues configuration information.
parameters shows general RADIUS configuration for the switch.
- show RADIUS accounting statistics information.
information.
- show comprehensive statistics information for the
host.
priority(p. 582)
priorities(p. 598)
Type-of-Service(p. 601)
table(p. 607)
show
(p. 583)
583