HP ProCurve 5400zl Reference Manual page 388

Command Line Interface Reference Guide
number or (if configured) a name.
Depending on how many sessions are configured on the switch, you can use the same
command
to configure a MAC address as mirroring criteria in up to four sessions. To identify
a
session, you can enter either its name or number; for example: mirror 1 2 3 traffsrc4
Next Available Options:
mirror_session_id
■
mirror_session_name
■
mirror_session_id
■ [no] monitor mac MAC-ADDR < src | dst | both > mirror < 1 to 4 >
Mirror destination number.
Range: < 1 to 4 >
mirror_session_name
■ [no] monitor mac MAC-ADDR < src | dst | both > mirror
Mirror destination name.
monitor_mac_direction
■ [no] monitor mac MAC-ADDR < src | dst | both >
Specifies how the MAC address is used to filter and mirror packets in inbound and/or
outbound
traffic on the interfaces on which the mirroring session is applied.
Supported Values:
■ src -- Monitor traffic with this MAC as source
■ dst -- Monitor traffic with this MAC as destination
■ both -- Monitor traffic with this MAC as source or destination
Next Available Option:
mirror -- Mirror
■
© 2009 Hewlett-Packard Development Company, L.P.
< 1 to 4 > -- Mirror destination
-- Mirror destination
destination.(p. 385)
number.(p. 386)
name.(p. 386)
monitor
386