Command Line Interface Reference Guide
Next Available Options:
area-id
-- Show LSAs for the specified area only. (OSPF-AREA-ID)
■
advertise
■
link-state-id
■
router-id
■
sequence-number
■
status
-- The keyword is optional and can be
■
type
< router | network | summary | ... > -- Show LSAs of the specified type
■
link-state-id
■ show ip ospf external-link-state link-state-id IP-ADDR
Show LSAs with the specified ID only.
■ show ip ospf link-state link-state-id IP-ADDR
Show LSAs with the specified ID only.
lldp
■ show lldp
Usage: show lldp ...
Description: Show various LLDP settings. Use 'show lldp ?' for the
Next Available Options:
config
-- Show LLDP configuration
■
info
-- Show LLDP information about the remote or local
■
stats
-- Show LLDP
■
auto-provision
■
local
■ show ip pim bsr local
Show local Candidate-BSR configuration information.
local-device
■ show lldp info local-device
Show LLDP local device information.
Next Available Option:
port-list
■
PORT-LIST)
lockout-mac
■ show lockout-mac
© 2009 Hewlett-Packard Development Company, L.P.
-- Show each LSA as a stream of bytes in hexadecimal
-- Show LSAs with the specified ID only. (IP-ADDR)
-- Show LSAs with the specified Router ID only. (IP-ADDR)
-- Show LSAs with the specified sequence number
list of all possible options.
statistics(p. 596)
-- Show LLDP auto-provision related info for
-- Show remote or local device information for the specified ports. ([ethernet]
(p. 578)
omitted.(p. 596)
information(p. 540)
device(p. 557)
(p. 530)
notation.(p. 529)
(p. 566)
(p. 587)
only.(p. 589)
only.(p. 600)
radio-ports(p. 532)
show
566