Command Line Interface Reference Guide
Usage: show monitor
Description: Show the switch network monitoring status and
Next Available Options:
mirror_session_id
■
name
-- Mirror destination
■
endpoint
■
motd
■ show banner motd
Usage: show banner motd
Description: show the configured banner text.
mroute
■ show ip mroute
Usage: show ip mroute [command]
Description: Show IP multicast routing table. The 'command' can be used to
Next Available Options:
IP-ADDR
■
(IP-ADDR)
interface
■
■ show ip pim mroute
Usage: show ip pim mroute [GRP-ADDR SRC-ADDR]
Description: Show PIM-specific information from the IP multicast routing
Next Available Option:
IP-ADDR
■
mst-config
■ show spanning-tree mst-config
Show multiple spanning tree region configuration.
■ show spanning-tree pending mst-config
Show multiple spanning tree pending region configuration.
© 2009 Hewlett-Packard Development Company, L.P.
configuration, if network monitoring is enabled.
< 1 to 4 > -- Mirror destination
name.(p. 572)
-- Remote mirroring destination
obtain more detailed information of the IP multicast routing
functionality. Use 'show ip mroute ?' to get a list of all
possible commands.
-- Show detailed information for the specified entry from the IP multicast routing table
(p. 562)
-- Show IP multicast routing interfaces'
table. Invoked without parameters shows all PIM entries from
the IP MRT. If multicast group address and source address are
specified then detailed information for the specified entry is
shown.
-- Specify the IP multicast group address of the MRT entry. (IP-ADDR)
number.(p. 569)
configuration.(p. 550)
information(p. 559)
show
(p. 562)
571