Command Line Interface Reference Guide
■ 0
■ 1
■ 2
■ 3
■ 4
■ 5
■ 6
■ 7
■ interface vlan VLAN-ID vrrp vrid < 1 to 255 > priority < 1 to 255 >
Usage: vrrp vrid <VRID> priority <1-255>
Description: Configure priority for the virtual router instance.
Range: < 1 to 255 >
■ interface svlan VLAN-ID qos priority < 0 | 1 | 2 | ... >
Specify priority to use.
Supported Values:
■ 0
■ 1
■ 2
■ 3
■ 4
■ 5
■ 6
■ 7
propagation-delay
■ interface vlan VLAN-ID ip pim-dense propagation-delay < 250 to 2000 >
Usage: ip pim-dense propagation-delay <250-2000>
Description: Set the value inserted into the LAN Prune Delay field of a
Range: < 250 to 2000 >
■ interface vlan VLAN-ID ip pim-sparse propagation-delay < 250 to 2000 >
Usage: ip pim-sparse propagation-delay <250-2000>
Description: Set the value inserted into the LAN Prune Delay field of a
Range: < 250 to 2000 >
protocol
■ interface vlan VLAN-ID protocol
Set a predefined protocol for the current VLAN.
Next Available Options:
protocols
■
© 2009 Hewlett-Packard Development Company, L.P.
The default value is '100'.
LAN Prune Delay option on this interface. Default is 500
milliseconds.
LAN Prune Delay option on this interface. Default is 500
milliseconds.
< IPX | IPv4 | IPv6 | ... > -- Set a predefined protocol for the current VLAN.
interface
(p. 267)
266