Setup - HP ProCurve 5400zl Reference Manual

OVERVIEW
Category:
Primary context:
Related Commands
Usage: setup [default-logon <CLI|Menu>]
Description: Enter the 'Switch Setup' screen for basic switch configuration.
COMMAND STRUCTURE

■ setup

default-logon
(p. 507)
■ setup mgmt-interfaces
management interfaces
EXAMPLES
Example: setup
Access the Switch Setup screen to quickly configure IP addressing and other basic settings:
ProCurve# setup
ProCurve
===========================- TELNET - MANAGER MODE -============================
System Name : HPswitch
System Contact : Sysadmin
Manager Password : ***********
Logon Default : CLI
Community Name : public
Default Gateway : 10.10.10.1
Time Sync Method [None] : TIMEP
TimeP Mode [Disabled] : Disabled
IP Config [DHCP/Bootp] : Manual
IP Address
Subnet Mask : 255.255.255.0
Actions->
Enter System Name - up to 25 characters.
Use arrow keys to change field selection, <Space> to toggle field choices,
and <Enter> to go to Actions.
© 2009 Hewlett-Packard Development Company, L.P.
Switch Management
manager
The optional parameter 'default-logon' changes the user
interface presented after boot without entering full-screen
setup.
< CLI | Menu > -- Specify whether switch should boot to CLI (default) or menu.
-- Enter the 'Management Interface Wizard' for configuring various
(p. 507)
: 10.10.10.150
Cancel Edit
Switch Setup
Confirm Password : ***********
Time Zone [0] : -480
Spanning Tree Enabled [No] : No
Save Help
setup
1-Jan-2001 2:14:27
506