HP ProCurve 5400zl Reference Manual page 310

Command Line Interface Reference Guide
Description: Define the device router id.
Next Available Option:
ipaddr -- Define the device router id (IP-ADDR)
■
routing
■ [no] ip routing
Usage: [no] ip routing
Description: Enable/disable IP routing support on the device.
server
■ ip timep manual IP-ADDR
Timep server IPv4 address.
Next Available Option:
interval < 1 to 9999 > -- Specify how often (in minutes) the switch tries to get the current
■
301)
server-address
■ [no] ip dns server-address
Configure DNS server IP address.
Next Available Option:
priority < 1 to 2 > -- Priority of Server Address. (NUMBER)
■
serverV6
■ ip timep manual IPV6-ADDR
Timep server IPv6 address.
Next Available Option:
interval < 1 to 9999 > -- Specify how often (in minutes) the switch tries to get the current
■
301)
source-binding
■ [no] ip source-binding
Usage: [no] ip source-binding <VLAN-ID> <MAC-ADDR> <IP-ADDR>
Description: Add/remove a static IP-to-MAC binding in the DHCP snooping
Parameters:
© 2009 Hewlett-Packard Development Company, L.P.
The no form of the command clears the router-id.
[ethernet] <PORT-NUM>
database.
(p. 302)
(p. 305)
ip
time.(p.
time.(p.
308