HP ProCurve 5400zl Reference Manual page 246

Command Line Interface Reference Guide
To associate L3-Mac-Address with a VLAN with default
timeout interval of 60s.
ip-recv-mac-address <mac-address>
To disassociate L3-Mac_address with a VLAN.
Parameters:
<mac-address>
interval
<1-255>
Next Available Option:
mac-address
■
ipv6
■ [no] interface [ETHERNET] PORT-LIST ipv6
Usage: [no] ipv6 ...
Description: Configure various IP parameters for the VLAN. The 'ipv6'
Next Available Option:
access-group
■
■ interface vlan VLAN-ID ipv6
Usage: [no] ipv6 ...
Description: Configure various IP parameters for the VLAN. The 'ipv6'
Next Available Options:
enable -- Enable IPv6 on an interface and configures an automatically generated link-local
■
addr.(p. 232)
address
■
mld -- Enable/disable/configure IPv6 Multicast Listener Discovery (MLD) feature on a
■
251)
access-group
■
nd -- IPv6 nodes on the same link use Neighbor Discovery to discover each other's presence,
■
link-layer addresses, routers and to maintain reachability information about the paths to active
neighbors(p. 255)
■ interface svlan VLAN-ID ipv6
© 2009 Hewlett-Packard Development Company, L.P.
no ip-recv-mac-address
- The L3-mac-address to be associated with a VLAN.
- Specify L3-Mac-Address timeout interval.
- Timeout interval in seconds <1-255>.
-- The L3-mac-address to be associated with a VLAN. (MAC-ADDR)
command must be followed by a feature-specific keyword.
Use 'ipv6 ?' to get a list of all possible options.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
-- Apply a IPV6 ACl on the interface (ASCII-STR)
command must be followed by a feature-specific keyword.
Use 'ipv6 ?' to get a list of all possible options.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
-- Set IPv6 parameters for communication within an IP
-- Apply a IPV6 ACl on a VLAN (ASCII-STR)
(p. 214)
network(p. 216)
(p. 214)
interface
(p. 249)
VLAN(p.
244