HP ProCurve 5400zl Reference Manual page 563

Command Line Interface Reference Guide
Next Available Options:
port-list
■
578)
config -- Show configuration
■
display -- Show summary of network traffic handled by the
■
brief -- Show the ports' operational
■
port-utilization
■
custom
■
intrusion-log
■ show port-security intrusion-log
Show the intrusion log records.
ip
■ show ip
Usage: show ip [...]
Description: Show the device IP configuration. Invoked without parameters
Next Available Options:
authorized-managers
■
dns -- Show configured DNS server IP addresses on the
■
client-public-key
■
helper-address
■
forwarded(p. 555)
forward-protocol
■
are to be forwarded based on configured
icmp -- Show ICMP Rate Limiting
■
host-public-key
■
igmp -- Invoked without any parameters, shows per-VLAN IGMP status, or, if VLANs are disabled
■
displays the global IGMP
irdp -- Show IRDP (ICMP Router Discovery Protocol)
■
ospf -- Show OSPF operational and configuration
■
rip -- Show RIP operational and configuration
■
route -- Show the IP routing
■
ssh -- Show both current SSH configuration and the status of active
■
mroute -- Show IP multicast routing
■
pim -- Show PIM protocol operational and configuration
■
source-lockdown
■
source-binding
■
ip-addr
■ show ip route IP-ADDR
Destination IP address to display the routes to.
© 2009 Hewlett-Packard Development Company, L.P.
-- Show summary of network traffic handled by the ports ([ethernet] PORT-LIST)
information(p. 540)
-- Show the ports'
-- Show the ports' parameters in customized
shows IP configuration for the switch or all VLANs. When
followed by a parameter displays information for a particular
IP protocol or feature. To get a list of all possible
parameters use 'show ip ?'.
-- Show IPV4 addresses allowed to manage the
-- Show currently loaded public keys for authorized clients (NUMBER)
-- Show DHCP servers where DHCP requests received by the switch are to be
-- Show server addresses where broadcast requests received by the switch
-- Display the SSH host RSA public key (NUMBER)
status(p. 556)
table(p. 587)
-- Show Dynamic IP Lockdown configuration.
-- Show Dynamic IP Lockdown trap status.
parameters(p. 535)
bandwidth-utilization(p. 581)
order(p. 544)
port(p. 552)
settings(p. 556)
settings(p. 563)
information(p. 574)
information(p. 586)
table(p. 571)
ports(p. 549)
switch(p. 532)
switch(p. 549)
(p. 555)
connections(p. 593)
information(p. 576)
(p. 592)
(p. 592)
show
(p.
(p. 537)
561