Command Line Interface Reference Guide
rip-compatible
■
packets.(p. 747)
■ vlan VLAN-ID connection-rate-filter unblock all
Resets all previously blocked by the connection rate filter
■ vlan VLAN-ID monitor all < In | Out | Both >
Monitor all traffic.
Supported Values:
■ In -- Monitor all inbound traffic
■ Out -- Monitor all outbound traffic
■ Both -- Monitor all inbound and outbound traffic
Next Available Option:
mirror
-- Mirror
■
any
■ vlan VLAN-ID ip pim-dense ip-addr any
Dynamically determine IP address.
■ vlan VLAN-ID ip pim-sparse ip-addr any
Dynamically determine IP address.
anycast
■ [no] vlan VLAN-ID ipv6 address IPV6-ADDR/PREFIX-LEN anycast
Address that is assigned to a set of interfaces that typically belong to different
nodes
area
■ vlan VLAN-ID ip ospf area
Specify an OSPF area.
Next Available Options:
area-id
-- Single integer or IP address style dotted decimal. (OSPF-AREA-ID)
■
backbone
■
■ vlan VLAN-ID ip ospf IP-ADDR area
Specify an OSPF area.
Next Available Options:
area-id
-- Single integer or IP address style dotted decimal. (OSPF-AREA-ID)
■
backbone
■
© 2009 Hewlett-Packard Development Company, L.P.
< V1-only | V2-only | V1-or-V2 > -- Define RIP version for incoming and outgoing
destination.(p. 735)
-- The backbone area (the same as
-- The backbone area (the same as
0.0.0.0).(p. 719)
0.0.0.0).(p. 719)
vlan
(p. 717)
(p. 717)
716