Command Line Interface Reference Guide
■ qos device-priority IP-ADDR/mask-LENGTH dscp
Specify DSCP policy to use.
Next Available Options:
integer-range
■
binary-range
■
well-defined
■
Codepoint) value and an
■ qos device-priority IPV6-ADDR dscp
Specify DSCP policy to use.
Next Available Options:
integer-range
■
binary-range
■
well-defined
■
Codepoint) value and an
■ qos device-priority IPV6-ADDR/PREFIX-LEN dscp
Specify DSCP policy to use.
Next Available Options:
integer-range
■
binary-range
■
well-defined
■
Codepoint) value and an
■ qos < udp-port | tcp-port > TCP/UDP-PORT dscp
Specify DSCP policy to use.
Supported Values:
Binary formatted value from 000000 to 111111
Next Available Options:
integer-range
■
binary-range
■
well-defined
■
Codepoint) value and an
■ qos < udp-port | tcp-port > range TCP/UDP-PORT TCP/UDP-PORT dscp
Specify DSCP policy to use.
Supported Values:
Binary formatted value from 000000 to 111111
Next Available Options:
integer-range
■
binary-range
■
well-defined
■
Codepoint) value and an
■ qos < udp-port | tcp-port > ipv4 TCP/UDP-PORT dscp
Specify DSCP policy to use.
© 2009 Hewlett-Packard Development Company, L.P.
< 0 to 63 > -- Specify the DSCP code-point in decimal.
< 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
< af11 | af12 | af13 | ... > -- Define mapping between a DSCP (Differentiated-Services
802(p. 434)
< 0 to 63 > -- Specify the DSCP code-point in decimal.
< 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
< af11 | af12 | af13 | ... > -- Define mapping between a DSCP (Differentiated-Services
802(p. 434)
< 0 to 63 > -- Specify the DSCP code-point in decimal.
< 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
< af11 | af12 | af13 | ... > -- Define mapping between a DSCP (Differentiated-Services
802(p. 434)
< 0 to 63 > -- Specify the DSCP code-point in decimal.
< 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
< af11 | af12 | af13 | ... > -- Define mapping between a DSCP (Differentiated-Services
802(p. 434)
< 0 to 63 > -- Specify the DSCP code-point in decimal.
< 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
< af11 | af12 | af13 | ... > -- Define mapping between a DSCP (Differentiated-Services
802(p. 434)
qos
(p. 423)
(p. 416)
(p. 423)
(p. 416)
(p. 423)
(p. 416)
(p. 423)
(p. 416)
(p. 423)
(p. 416)
419