HP ProCurve 5400zl Reference Manual page 127

Command Line Interface Reference Guide
Copy data to a TFTP server.
Next Available Options:
tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR)
■
tftp-ipv6
■
■ copy crash-log SLOT-ID-RANGE tftp
Copy data to a TFTP server.
Next Available Options:
tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR)
■
tftp-ipv6
■
■ copy crash-log mm tftp
Copy data to a TFTP server.
Next Available Options:
tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR)
■
tftp-ipv6
■
■ copy crash-log tftp
Copy data to a TFTP server.
Next Available Options:
tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR)
■
tftp-ipv6
■
■ copy flash tftp
Copy data to a TFTP server.
Next Available Options:
tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR)
■
tftp-ipv6
■
■ copy running-config tftp
Copy data to a TFTP server.
Next Available Options:
tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR)
■
tftp-ipv6
■
■ copy startup-config tftp
Copy data to a TFTP server.
Next Available Options:
tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR)
■
© 2009 Hewlett-Packard Development Company, L.P.
-- Specify TFTP server IPv6 address. (IPV6-ADDR)
-- Specify TFTP server IPv6 address. (IPV6-ADDR)
-- Specify TFTP server IPv6 address. (IPV6-ADDR)
-- Specify TFTP server IPv6 address. (IPV6-ADDR)
-- Specify TFTP server IPv6 address. (IPV6-ADDR)
-- Specify TFTP server IPv6 address. (IPV6-ADDR)
(p. 126)
(p. 129)
(p. 126)
(p. 129)
(p. 126)
(p. 129)
(p. 126)
(p. 129)
(p. 126)
(p. 129)
(p. 126)
(p. 129)
(p. 126)
copy
125