HP ProCurve 5400zl Reference Manual page 474

Command Line Interface Reference Guide
■
■
backbone
■
normal
■
nssa
■
■
■
range
■
■
■
■
stub
■
■
■
virtual-link
■
■
■
■
■
■
■
■
default-metric
■
imported into OSPF by this router
distance
■
routes learned by OSPF
external
■
by OSPF.
inter-area
■
learned by OSPF.
intra-area
■
learned by OSPF.
metric-type
■
imported into OSPF by this router
redistribute
■
into OSPF
restrict -- Prevent redistribution of routes via OSPF
■
ip-addr
■
rfc1583-compatibility
■
trap < virtual-interface-state-change | neighbor-state-change | virtual-neighbor-state-change
■
| ... > -- Enable/disable OSPF traps
■ [no] router pim
Context (p. 484)
bsr-candidate
■
(Candidate-BSR) for a PIM-SM domain
© 2009 Hewlett-Packard Development Company, L.P.
retransmit-interval < 1 to 3600 > -- Set retransmit interval in seconds; the default is
5. (p. 486)
transit-delay < 1 to 3600 > -- Set transit delay in seconds; the default is 1.
-- The backbone area (the same as 0.0.0.0).
-- Define a "normal" area.
< 0 to 16777215 > -- Define a "not-so-stubby" area (or NSSA) and its cost.
metric-type < type1 | type2 > -- Metric type of the type-7 default.
no-summary -- Do not send summary LSA into the area.
-- Summarize routes matching address/MASK pair.
ip -- Specify IP address/MASK pair. (IP-ADDR/MASK-LENGTH)
no-advertise -- Do not advertise the range outside the area.
type < summary | nssa > -- Link state database type to apply the range.
-- Define a "stub" area and specify its cost.
cost < 0 to 16777215 > -- Enter cost to use when injecting default routes into the
area. (p. 478)
no-summary -- Do not send summary LSA into the area.
-- Specify a virtual neighbor. (IP-ADDR)
authentication -- Disable authentication.
authentication-key -- Set simple authentication method and key.
authentication-key
■
(OCTET-STR) (p. 476)
dead-interval < 1 to 65535 > -- Set dead interval in seconds; the default is 40.
hello-interval < 1 to 65535 > -- Set hello interval in seconds; the default is 10.
md5-auth-key-chain -- Set MD5 authentication method and key chain.
chain-name -- Specify key chain to use for MD5 authentication. (ASCII-STR)
■
478)
retransmit-interval < 1 to 3600 > -- Set retransmit interval in seconds; the default is
5. (p. 486)
transit-delay < 1 to 3600 > -- Set transit delay in seconds; the default is 1.
< 0 to 16777215 > -- The default metric used for advertising external routes
-- Set administrative distance to associate with intra-area, inter-area and AS-external
(p. 479)
< 1 to 255 > -- Set administrative distance to associate with external routes learned
(p. 479)
< 1 to 255 > -- Set administrative distance to associate with inter-area routes
(p. 480)
< 1 to 255 > -- Set administrative distance to associate with intra-area routes
(p. 480)
< type1 | type2 > -- The default metric type used for advertising external routes
< connected | static | rip > -- Specify source protocols which will be redistributed
(p. 485)
-- Prevent redistribution of routes via OSPF (IP-ADDR/MASK-LENGTH)
-- Enable/disable RFC-1583 compatibility
-- Enable/disable/configure PIM protocol on the device, or enter PIM Configuration
-- Configure the router to advertise itself as the Candidate Bootstrap Router
(p. 482)
(p. 489)
(p. 476)
-- OSPF authentication key (maximum 8 characters).
(p. 478)
(p. 482)
(p. 485)
(p. 489)
(p. 477)
(p. 477)
(p. 482)
(p. 482)
(p. 484)
(p. 481)
(p. 482)
(p. 482)
(p. 492)
(p. 476)
(p. 486)
router
(p. 489)
(p. 483)
(p. 491)
(p. 478)
(p. 480)
(p. 481)
(p.
(p. 489)
(p. 481)
472