HP ProCurve 5400zl Reference Manual page 356

Command Line Interface Reference Guide
Description: Configure various parameters related to lldp automatic
Next Available Option:
radio-ports
■
application(p. 358)
auto-vlan
■ [no] lldp auto-provision radio-ports auto-vlan
Create a VLAN, with the specified VLAN id value, to be used as
the radio-ports controller auto-generated VLAN.
Next Available Option:
auto-vlan
■
radio-ports controller auto-generated VLAN. (VLAN-ID)
■ lldp auto-provision radio-ports auto-vlan < 2 to 4094 >
Create a VLAN, with the specified VLAN id value, to be used as
the radio-ports controller auto-generated VLAN.
Range: < 2 to 4094 >
Next Available Option:
auto -- (p. 353)
■
basicTlvEnable
■ [no] lldp config [ETHERNET] PORT-LIST basicTlvEnable < port_descr | system_name | system_descr
| ... >
Specify the Basic TLV List to be advertised.
Supported Values:
■ port_descr -- Port Description TLV
■ system_name -- System Name TLV
■ system_descr -- System Description TLV
■ system_cap -- System Capability TLV
CA-TYPE
■ lldp config [ETHERNET] PORT-LIST medPortLocation civic-addr COUNTRY NUMBER NUMBER
Specify the ca-type value of range <0-255>.
Next Available Option:
CA-VALUE
■
CA-VALUE
■ lldp config [ETHERNET] PORT-LIST medPortLocation civic-addr COUNTRY NUMBER NUMBER
CA-VALUE
© 2009 Hewlett-Packard Development Company, L.P.
provisioning.
-- Configure various parameters related to automatic provisioning for the radio-port
< 2 to 4094 > -- Create a VLAN, with the specified VLAN id value, to be used as the
-- Specify the ca-value string. (ASCII-STR)
(p. 354)
(p. 354)
lldp
354