HP ProCurve 5400zl Reference Manual page 169

Command Line Interface Reference Guide
remote-id
■
(NUMBER)
authorized-server
■ [no] dhcp-snooping authorized-server
Usage: [no] dhcp-snooping authorized-server <IP-ADDR>
Description: Configure valid DHCP Servers.
Parameters:
o IP-ADDR - The Address of a trusted DHCP Server.
Next Available Option:
NONAME2
■
database
■ [no] dhcp-snooping database
Usage: [no] dhcp-snooping database [file ASCII-STR] [delay
Description: Configure lease database transfer options.
Parameters:
o [file ASCI-STR] - File name in the form of a Universal Resource Locator.
o [delay
o [timeout <0-86400>]
Next Available Options:
file -- URL Format: "tftp://<ip-address>/<filename>". (ASCII-STR)
■
delay < 15 to 86400 > -- Seconds to delay writing to the lease database
■
timeout
■
© 2009 Hewlett-Packard Development Company, L.P.
< mac | subnet-ip | mgmt-ip > -- Set relay information option remote-id value to use.
(p. 169)
For DHCP Snooping to allow a server to client packet
to be forwarded, it must be received on a trusted port
from a valid server. If no authorized servers are configured
all server addresses are valid. A maximum of 20 authorized
servers are supported.
-- DHCP Server address. (IP-ADDR)
No additional parameters are required when 'no' is specified.
The URL must be "tftp://IP-ADDR/ASCII-STR".
The max filename length is 63 characters.
<15-86400>] - Number of seconds to delay writing the database.
The default delay is 300 seconds
- Number of seconds to wait for the database file
transfer to finish before declaring an error.
A value of 0 means retry indefinitely.
The default timeout is 300 seconds
< 0 to 86400 > -- Seconds to wait for the transfer before
(p. 168)
[timeout <0-86400>]
dhcp-snooping
<15-86400>]
(p. 168)
file.(p. 168)
failing.(p. 169)
167