Command Line Interface Reference Guide
virtual-link
■ [no] router ospf area OSPF-AREA-ID virtual-link IP-ADDR
Specify a virtual neighbor.
Next Available Options:
transit-delay
■
retransmit-interval
■
hello-interval
■
dead-interval
■
authentication-key
■
authentication
■
md5-auth-key-chain
■
■ [no] router ospf area backbone virtual-link IP-ADDR
Specify a virtual neighbor.
Next Available Options:
transit-delay
■
retransmit-interval
■
hello-interval
■
dead-interval
■
authentication-key
■
authentication
■
md5-auth-key-chain
■
vrrp
■ [no] router vrrp
Usage: [no] router vrrp [traps]
Description: Enable/disable/configure Virtual Router Redundancy Protocol (VRRP)
Next Available Option:
traps
-- Enable/disable generation of VRRP
■
© 2009 Hewlett-Packard Development Company, L.P.
< 1 to 3600 > -- Set transit delay in seconds; the default is
< 1 to 3600 > -- Set retransmit interval in seconds; the default is
< 1 to 65535 > -- Set hello interval in seconds; the default is
< 1 to 65535 > -- Set dead interval in seconds; the default is
-- Set simple authentication method and
-- Disable
authentication.(p. 476)
-- Set MD5 authentication method and key
< 1 to 3600 > -- Set transit delay in seconds; the default is
< 1 to 3600 > -- Set retransmit interval in seconds; the default is
< 1 to 65535 > -- Set hello interval in seconds; the default is
< 1 to 65535 > -- Set dead interval in seconds; the default is
-- Set simple authentication method and
-- Disable
authentication.(p. 476)
-- Set MD5 authentication method and key
on the device.
key.(p. 476)
chain.(p. 481)
key.(p. 476)
chain.(p. 481)
traps(p. 491)
router
1.(p. 489)
5.(p. 486)
10.(p. 480)
40.(p. 478)
1.(p. 489)
5.(p. 486)
10.(p. 480)
40.(p. 478)
492