Command Line Interface Reference Guide
Next Available Options:
PORT-LIST
■
active
-- Activate/deactivate 802.1X
■
authorization
■ aaa authorization
Usage: [no] aaa authorization <commands> <radius>
Description: Configure authorization parameters on the switch.
Next Available Option:
commands
■
auth-timeout
■ aaa port-access supplicant [ETHERNET] PORT-LIST auth-timeout < 1 to 300 >
Set the challenge reception timeout (default 30sec.).
Range: < 1 to 300 >
auth-vid
■ [no] aaa port-access authenticator [ETHERNET] PORT-LIST auth-vid
Configures VLAN where to move port after successful authentication (not configured
by default).
Next Available Option:
VLAN-ID
■
by default). (VLAN-ID)
■ [no] aaa port-access mac-based [ETHERNET] PORT-LIST auth-vid
Configures VLAN where to move port after successful authentication (not configured
by default).
© 2009 Hewlett-Packard Development Company, L.P.
no specific MAC address filter on the port.
The default is no client limit.
o 'initialize' re-initialize authentication on the specified
ports. That is, 'initialize' blocks inbound and outbound
traffic and restarts the authentication process on the
specified ports that are configured with 'control auto' (see
the 'control' parameter, described above) and actively
operating as authenticators.
o 'reauthenticate' forces re-authentication (unless the
authenticator is in 'HELD' state).
o 'mac-addr' allows to specify which client needs to be forced
o 'clear-statistics' clears authenticator statistics
counters.
-- Manage 802.1X on the device port(s). ([ethernet] PORT-LIST)
-- Configure exec (shell) commands authorization.
-- Configures VLAN where to move port after successful authentication (not configured
(p. 54)
authenticator.(p. 27)
(p. 43)
(p. 31)
aaa
30