HP ProCurve 5400zl Reference Manual page 232

Command Line Interface Reference Guide
Set dead interval in seconds; the default is 40.
Range: < 1 to 65535 >
■ interface vlan VLAN-ID ip ospf IP-ADDR dead-interval < 1 to 65535 >
Set dead interval in seconds; the default is 40.
Range: < 1 to 65535 >
■ interface vlan VLAN-ID ip ospf all dead-interval < 1 to 65535 >
Set dead interval in seconds; the default is 40.
Range: < 1 to 65535 >
dhcp
■ [no] interface vlan VLAN-ID ipv6 address dhcp
Configure a DHCPv6 client.
Next Available Option:
full -- Obtain IPv6 address & Configuration information from DHCPv6
■
■ [no] interface svlan VLAN-ID ipv6 address dhcp
Configure a DHCPv6 client.
Next Available Option:
full -- Obtain IPv6 address & Configuration information from DHCPv6
■
dhcp-bootp
■ interface vlan VLAN-ID ip address dhcp-bootp
Configure the interface to use DHCP/Bootp server to acquire parameters.
■ interface svlan VLAN-ID ip address dhcp-bootp
Configure the interface to use DHCP/Bootp server to acquire parameters.
dhcp-snooping
■ interface [ETHERNET] PORT-LIST dhcp-snooping
Usage: [no] dhcp-snooping trust
Description: Configure the port as trusted or untrusted. Only DHCP server
Next Available Option:
trust -- Configure trusted
■
■ [no] interface vlan VLAN-ID dhcp-snooping
■ [no] interface svlan VLAN-ID dhcp-snooping
© 2009 Hewlett-Packard Development Company, L.P.
packets received on trusted interfaces will be forwarded.
By specifying 'no' the port will be configured as untrusted.
The default state is untrusted.
interfaces(p. 279)
interface
server.(p. 235)
server.(p. 235)
230