HP ProCurve 5400zl Reference Manual page 357

Command Line Interface Reference Guide
Specify the ca-value string.
civic-addr
■ [no] lldp config [ETHERNET] PORT-LIST medPortLocation civic-addr
Usage: lldp config <port-list> medPortLocation civic-str <COUNTRY-STR>
Description: Specify the civic location-id information to be advertised.
Next Available Option:
COUNTRY
■
config
■ lldp config [ETHERNET] PORT-LIST
Usage: [no] lldp config <PORT-LIST> <basicTlvEnable TLVMAP |
Description: Specify configurational parameters to the port.
© 2009 Hewlett-Packard Development Company, L.P.
The total length of the TLV is 104.
COUNTRY-STR : Set the Country Code of two characters.e.g. DE or US.
WHAT : Set the 'what' number of range <0-2>.
0 - Location of DHCP server.
1 - Location of Switch.
2 - Location of Client.
CA-TYPE : Set the ca-type of range <0-255>.
It is a repeatable parameter.ca-type should be unique.
ca-type sholud be followed by ca-value.
CA-VALUE : Set the ca-value string.
-- Specify the Country Code of two characters. (ASCII-STR)
Set basicTlvEnable with any one of the following TLV Maps.
port_descr
system_name
system_descr
system_cap
Set dot1TlvEnable with the following TLVs.
vlan_name
Set dot3TlvEnable with the following TLV Map.
macphy_config : Send Mac Phy Config TLV out this port.
Set ipAddrEnable with the IP-ADDR to send out this port.
Set medPortLocation with location information for the port.
civic-addr
elin-addr
Set medTlvEnable with any one of the following TLV Maps.
capabilities
network_policy : Send Network Policy TLV out this port.
location_id
poe
<WHAT> <CA-TYPE> <CA-VALUE>
dot1TlvEnable vlan-name |
dot3TlvEnable
ipAddrEnable <IPV4-ADDR | IPV6-ADDR> |
medPortLocation ...
medTlvEnable
: Send Port Description TLV out this port.
: Send System Name TLV out this port.
: Send System Descr TLV out this port.
: Send Capability TLV out this port.
: Enable VLAN name TLV out the given port(s).
: Set civic address to send out this port.
: Set elin address to send out this port.
: Send Capability TLV out this port.This TLV has
to be enabled first to enable any MED TLV's.
: Send Location Id TLV out this port.
: Send Med Poe TLV out this port.
(p. 356)
TLVMAP |
|
TLVMAP>
lldp
355