HP ProCurve 5400zl Reference Manual page 570

Command Line Interface Reference Guide
mac-address
■ show mac-address
Usage: show mac-address [[ethernet] PORT-LIST|vlan VLAN-ID|MAC-ADDR]
Description: Show MAC addresses the switch has learned.
Next Available Options:
address-table-port
■
(p. 528)
vlan -- Show MAC addresses learned on the specified VLAN. (VLAN-ID)
■
MAC -- Show port the specified MAC address is located on. (MAC-ADDR)
■
mac-based
■ show port-access mac-based
Usage: show port-access [PORT-LIST] mac-based
show port-access mac-based [PORT-LIST]
show port-access mac-based config [PORT-LIST] [auth-server|detail]
Description: Show MAC Authentication statistics and configuration. If
Next Available Options:
■ -- Specify ports for which MAC Authentication information will be shown. ([ethernet] PORT-LIST)
(p. 525)
config -- Show the current configuration of MAC
■
clients -- Show the connected MAC address
■
■ show port-access [ETHERNET] PORT-LIST mac-based
Usage: show port-access [PORT-LIST] mac-based
show port-access mac-based [PORT-LIST]
show port-access mac-based config [PORT-LIST] [auth-server|detail]
Description: Show MAC Authentication statistics and configuration. If
© 2009 Hewlett-Packard Development Company, L.P.
You can display addresses learned on a particular port,
a PORT-LIST, a VLAN-ID, or a particular MAC address.
-- Show MAC addresses learned on the specified ports. ([ethernet] PORT-LIST)
[<config [auth-server|detail]>|clients]
[<config [auth-server|detail]>|clients]
PORT-LIST parameter has been specified then information only
for the specified ports is shown.
If 'config' keyword has been specified then the configuration
of MAC Authentication is shown.
If 'auth-server' keyword has been specified then the
authentication server-related configuration items are shown.
If PORT-LIST and 'detail' keyword has been specified then the
detailed configuration of MAC Authentication for the specified
ports is shown.
If 'clients' keyword has been specified then the connected MAC
address information is shown.
[<config [auth-server|detail]>|clients]
[<config [auth-server|detail]>|clients]
PORT-LIST parameter has been specified then information only
for the specified ports is shown.
If 'config' keyword has been specified then the configuration
Authentication.(p. 540)
information.(p. 538)
show
(p. 603)
(p. 567)
568