HP ProCurve 5400zl Reference Manual page 251

Command line interface, switch software
Hide thumbs Also See for ProCurve 5400zl:
Table of Contents

Advertisement

Command Line Interface Reference Guide
Next Available Option:
ip
-- Configure various IP parameters for the
lowest
■ interface vlan VLAN-ID vrrp vrid < 1 to 255 > primary-ip-address lowest
Dynamically determine lowest IP address.
lport-list
■ [no] interface vlan VLAN-ID vrrp vrid < 1 to 255 > track interface [ETHERNET] PORT-LIST
Usage: [no] vrrp vrid <VRID> track interface <LPORT-LIST>
Description: Enable/disable tracking of specified logical ports for VR.
mac-address
■ interface vlan VLAN-ID ip-recv-mac-address MAC-ADDR
The L3-mac-address to be associated with a VLAN.
Next Available Option:
interval
maxadvertinterval
■ interface vlan VLAN-ID ip irdp maxadvertinterval < 4 to 1800 >
Usage: [no] ip irdp maxadvertinterval <4-1800>
Description: Set the maximum time (in seconds) allowed between sending
Range: < 4 to 1800 >
max-graft-retries
■ interface vlan VLAN-ID ip pim-dense max-graft-retries < 1 to 10 >
Usage: ip pim-dense max-graft-retries <1-10>
Description: Set the maximum number of times this router will resend a
Range: < 1 to 10 >
mcast
■ [no] interface [ETHERNET] PORT-LIST rate-limit mcast
Set limits for multicast traffic.
Next Available Option:
in
-- Set limits for inbound multicast
© 2009 Hewlett-Packard Development Company, L.P.
-- Specify the L3-Mac-Address timeout interval.
unsolicited router advertisements.
Graft on this interface. Default is 2.
Loopback(p. 240)
(p. 240)
trafic(p. 238)
interface
249

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 3500ylProcurve 8200zl6200yl

Table of Contents