HP ProCurve 5400zl Reference Manual page 629

Command Line Interface Reference Guide
group
■ [no] snmpv3 group < ManagerPriv | ManagerAuth | OperatorAuth | ... >
Configure SNMPv3 User to Group entry.
Supported Values:
■ ManagerPriv -- Require privacy and authentication, can access all objects.
■ ManagerAuth -- Require authentication, can access all objects.
■ OperatorAuth -- Requires authentication, limited access to objects.
■ OperatorNoAuth -- No authentication required, limited access to objects.
■ ComManagerRW -- Community with manager and unrestricted write access.
■ ComManagerR -- Community with manager and restricted write access.
■ ComOperatorRW -- Community with operator and unrestricted write access.
■ ComOperatorR -- Community with operator and restricted write access.
Next Available Option:
user -- Set user to be added to the group. (ASCII-STR)
■
index
■ [no] snmpv3 community index INDEX
Set community index.
Next Available Option:
name -- Set community name. (ASCII-STR)
■
ipaddr
■ snmpv3 targetaddress TARGETADDRESS params PARAMS IP-ADDR
Set IP address of the destination target.
Next Available Options:
addr-mask
■
filter < None | Debug | All | ... > -- Set log filters.
■
max-msg-size
■
port-mask
■
retries < 0 to 255 > -- Set retries value; default is 3.
■
timeout
■
taglist -- Set list of values used to select this entry from snmpNotifyTable. (ASCII-STR)
■
udp-port
■
(TCP/UDP-PORT)
ipv6addr
■ snmpv3 targetaddress TARGETADDRESS params PARAMS IPV6-ADDR
Set IPv6 address of the destination target.
Next Available Options:
addr-mask
■
filter < None | Debug | All | ... > -- Set log filters.
■
© 2009 Hewlett-Packard Development Company, L.P.
-- Set range of transport addresses with this mask. (IP-ADDR)
< 484 to 65535 > -- Set maximum message size value; default is 1472.
-- Set range of udp ports with this mask. (TCP/UDP-PORT)
< 0 to 2147483647 > -- Set time-out value; default is 1500.
-- Set UDP port number to which the messages are sent; default is 162.
(p. 632)
-- Set range of transport addresses with this mask. (IP-ADDR)
(p. 632)
(p. 628)
(p. 626)
(p. 630)
(p. 626)
snmpv3
(p. 625)
(p. 628)
(p. 629)
(p. 632)
(p. 631)
(p. 625)
627