Command Line Interface Reference Guide
■ local3
■ local4
■ local5
■ local6
■ local7
ip-address
■ [no] logging IP-ADDR
Usage: [no] logging <IP-ADDR> [control-descr <text string>]
[no] logging priority-descr <text-string>
[no] logging facility <facility>
[no] logging severity <severity>
[no] logging system-module <module>
Description: Add an IP address to the list of receiving syslog servers.
Next Available Option:
control-descr
■
priority-descr
■ [no] logging priority-descr
Usage: [no] logging priority-descr <text string>
Description: A text string associated with the values of
Next Available Option:
priority-descr
■
(ASCII-STR)
■ logging priority-descr PRIORITY-DESCR
Usage: [no] logging priority-descr <text string>
Description: A text string associated with the values of
© 2009 Hewlett-Packard Development Company, L.P.
Use of 'no' without an IP address specified will remove all
IP addresses from the list of syslog receivers. If an IP
address is specified, that receiver will be removed.
- Specify syslog server facility with <facility>. 'no
logging facility <facility>' sets facility back to defaults.
- Specify severity for event messages to be filtered to the
syslog server with <severity>. 'no logging severity
<severity>' sets severity back to default.
- Event messages of specified system module will be sent to
the syslog server. 'no' sends messages from all system
modules. Messages are 1st filtered by selected severity.
-- A text string associated with the given
facility, severity, and system-module.
the string with a zero length string
The length of the string is limited to 255 characters.
-- A text string associated with the values of facility, severity, and system-module
(p. 365)
facility, severity, and system-module.
the string with a zero length string
The length of the string is limited to 255 characters.
IP-ADDr(p. 364)
'no' replaces
'no' replaces
logging
365