OVERVIEW
Category:
Primary context:
Related Commands
Usage: [no] password <manager|operator|port-access|all>
Description: Set or clear local password/username for a given access level.
Parameters:
o <manager|operator|port-access|all> - Level of access.
o user-name ASCII-STR - Username (up to 16 characters).
o <plaintext|sha-1> ASCII-STR - Format for the password entry, and
COMMAND STRUCTURE
■ [no] password
access level
plaintext
■
password
■
sha0
-- Enter SHA-0 hash of password.
■
password
■
sha1
-- Enter SHA-1 hash of password.
■
password
■
user-name
■
plaintext
■
password
■
sha0
■
password
■
sha1
■
password
■
■ [no] password
COMMAND DETAILS
access (p. 388)
all (p. 389)
password (p. 389)
access
■ [no] password < operator | manager >
© 2009 Hewlett-Packard Development Company, L.P.
Switch Management
config
front-panel-security (page 190)
show (page 511)
[user-name ASCII-STR] [<plaintext|sha1> ASCII-STR]
Invoked without 'no', the command sets or changes existent
password(s). If no password provided in the command, the user
will be prompted to enter the new password twice. The command
removes specific local password protection, if preceded by 'no'.
the password itself (up to 16 characters). 'plaintext' is
default type, and the only type accepted for 'port-access'.
access
< operator | manager > -- Set or clear local password/username for a given
(p. 388)
-- Enter plaintext password.
-- Set password (ASCII-STR)
-- Set password (ASCII-STR)
-- Set password (ASCII-STR)
-- Set username for the specified user category. (ASCII-STR)
-- Enter plaintext password.
-- Set password (ASCII-STR)
-- Enter SHA-0 hash of password.
-- Set password (ASCII-STR)
-- Enter SHA-1 hash of password.
-- Set password (ASCII-STR)
all
< all > -- Set or clear local password/username for a given access level
plaintext (p. 390)
sha0 (p. 390)
sha1 (p. 390)
(p. 390)
(p. 389)
(p. 390)
(p. 389)
(p. 390)
(p. 389)
(p. 390)
(p. 389)
(p. 390)
(p. 389)
(p. 390)
(p. 389)
password
(p. 391)
user-name (p. 391)
(p. 389)
388