Command Line Interface Reference Guide
Description: Show Web/MAC Authentication statistics and configuration. If
Next Available Options:
authenticator
■
mac-based
■
web-based
■
-a
■ show logging -a
Display all log events, including those from previous boot cycles.
access-list
■ show access-list
Usage: show access-list [config] |
Description: Show Access Control List information.
Parameters:
o config - Display all configured ACL's on the switch using
o vlan <VLAN-ID> - Display Access Control Lists currently applied
o <ACL-ID> - Display detailed information on the specified ACL.
o resources
o radius - Display ACLs applied via RADIUS.
o ports - Show ACLs applied to the specified ports.
Next Available Options:
radius
-- Display ACLs applied via RADIUS. ([ethernet] PORT-LIST)
■
config
-- Show all configured ACL's on the switch using the CLI syntax used to create them.
■
(p. 540)
vlan
-- Show ACLs applied to the specified VLAN. (VLAN-ID)
■
ports
-- Show ACLs applied to the specified ports. ([ethernet] PORT-LIST)
■
acl-name
■
resources
■
access-rights
■ show snmpv3 access-rights
Show information about access rights.
© 2009 Hewlett-Packard Development Company, L.P.
PORT-LIST parameter is specified then information only for the
specified ports is shown.
-- Show
802(p. 531)
-- Show MAC Authentication statistics and
-- Show Web Authentication statistics and
[vlan <VLAN-ID>] |
[<ACL-ID> [config]] |
[resources] |
[radius] |
[ports <PORT-LIST>]
are specified, a summary table is displayed.
the CLI syntax used to create them.
to the specified VLAN.
- Display ACL Rules/Masks availability.
-- Display detailed information on specified ACL. (ASCII-STR)
-- Display ACL Rules/Masks
configuration(p. 568)
configuration(p. 609)
If no parameters
availability.(p. 585)
(p. 583)
(p. 603)
(p. 580)
(p. 528)
show
527