HP ProCurve 5400zl Reference Manual page 387

OVERVIEW
Category:
Primary context:
Related Commands
Usage: [no] monitor mac MAC-ADDR <src | dst | both> mirror <1-4 | NAME-STR>
Description: Set up traffic monitoring for a given MAC address. Network
Parameters:
COMMAND STRUCTURE
■ [no] monitor
monitor_mac_direction
■
mirror
■
mirror_session_id
■
mirror_session_name
■
COMMAND DETAILS
mac (p. 385)
mirror (p. 385)
mac
■ [no] monitor mac MAC-ADDR
Configures the MAC address as selection criteria for mirroring traffic on
any port or learned VLAN on the switch.
Next Available Option:
monitor_mac_direction
■
mirror
■ [no] monitor mac MAC-ADDR < src | dst | both > mirror
Mirror destination. Assigns the inbound and/or outbound traffic filtered by the
specified
MAC address to a previously configured mirroring session. The session is identified
by a
© 2009 Hewlett-Packard Development Company, L.P.
config
show monitor (page 570)
traffic with this MAC address as the source or destination is
copied to the mirror port.
o MAC-ADDR - MAC address to be monitored
o <src | dst | both> - Type of traffic to monitor:
src - Monitor traffic with MAC-ADDR as the source.
dst - Monitor traffic with MAC-ADDR as the destination.
both - Monitor traffic with MAC-ADDR as the source or
destination.
o <1-4> - Mirror destination number
o NAME-STR - Friendly name associated with the mirror
destionation number.
mac -- MAC address. (MAC-ADDR)
< src | dst | both > --
-- Mirror destination.
< 1 to 4 > -- Mirror destination number.
-- Mirror destination name.
mirror_session_id (p. 386)
mirror_session_name (p. 386)
< src | dst | both > --
(p. 385)
(p. 386)
(p. 385)
(p. 386)
monitor
(p. 386)
(p. 386)
monitor_mac_direction (p. 386)
385