HP ProCurve 5400zl Reference Manual page 372

OVERVIEW
Category:
Primary context:
Related Commands
Usage: [no] loop-protect <...>
[[ethernet] PORT-LIST [receiver-action <send-disable|no-disable>]|
[transmit-interval <1-10>]|
[disable-period <0-604800>]|
[trap <loop-detected>]
Description: Configure Loop protection on the switch.
Parameters:
o ethernet PORT-LIST - Port(s) to configure loop protection on. By default
o receiver-action
o trap <loop-detected> - Configure Loop protection traps. The following
o disable-timer <0-604800> (default:0) - Sets the time in seconds to
o transmit-interval <1-10> (default:5) - Time in seconds between transmission
COMMAND STRUCTURE
■ loop-protect
reenable a port. (NUMBER)
■ [no] loop-protect
([ethernet] PORT-LIST)
receiver-action
■
are received on the specified port(s).
■ loop-protect
(p. 371)
■ [no] loop-protect
loop-detected
■
COMMAND DETAILS
disable-timer (p. 371)
loop-detected (p. 371)
© 2009 Hewlett-Packard Development Company, L.P.
config
loop protection is disabled on a port
- Sets the loop detected action per port. When a loop
is detected the port that received the loop protection
packet determines the action taken. If send-disable
is selected the port that transmitted the packet will
be disabled. If no-disable is selected, the port will
not be disabled. The default action is 'send-disable'.
traps are generated by Loop protection
- 'loop-detected' signifies that a loop was detected
on a port.
disable a port for when a loop has been detected. A
value of 0 disables the auto reenable functionality.
By default the timer is disabled.
disable-timer < 0 to 604800 > -- Set time in seconds to wait before attempting to
(p. 371)
port-list -- Specify the ports that are to be added to/removed from loop protection.
(p. 371)
< send-disable | no-disable > -- Select action to take when loop protect packets
transmit-interval < 1 to 10 > -- Set time between packet transmissions. (NUMBER)
trap -- Specify loop protection traps that are to be enabled/disabled.
-- generate trap when a loop is detected
port-list (p. 371)
receiver-action (p. 371)
of loop protection packets.
(p. 371)
(p. 371)
loop-protect
transmit-interval (p. 371)
trap (p. 371)
(p. 371)
370