Mstp Show Commands And Troubleshooting; Displaying Mstp Statistics - HP procurve 8100fl series Management And Configuration Manual

Spanning-Tree Operation

MSTP Show Commands and Troubleshooting

9-28
MSTP Show Commands and
Troubleshooting
The following commands are used to display MSTP statistics and
configuration information.
Command
MSTP Statistics:
show spanning-tree
show spanning-tree <interface-id>
show spanning-tree instance < ist | 1..16 > bridge
show spanning-tree instance < ist | 1..16 > <interface-id>
MSTP Configuration
show spanning-tree mst-config
MSTP Debug Information
debug spanning-tree

Displaying MSTP Statistics

The show spanning-tree command displays the MSTP statistics for the
connections between MST regions in a network.
Syntax: show spanning-tree
This command displays the switch's global and regional spanning-
tree status, plus the per-port spanning-tree operation at the regional
level. Note that values for the following parameters appear only for
ports connected to active devices: Designated Bridge, Hello Time, PtP,
and Edge.
Syntax: show spanning-tree < interface-id >
This command displays the spanning-tree status for the designated
interface. For example, to display data for the 1-gig port 5/2, you
would use this command: show spanning-tree gig 5/2
Page
below
below
9-30
9-30
9-31
9-31