HP ProCurve 5400zl Reference Manual page 391

Command Line Interface Reference Guide
Usage: [no] password <manager|operator|port-access|all>
Description: Set or clear local password/username for a given access level.
Parameters:
o <manager|operator|port-access|all> - Level of access.
o user-name ASCII-STR - Username (up to 16 characters).
o <plaintext|sha1> ASCII-STR - Format for the password entry, and
Supported Values:
■ operator -- Configure operator access.
■ manager -- Configure manager access.
Next Available Options:
user-name
■
plaintext
■
sha0 -- Enter SHA-0 hash of
■
sha1 -- Enter SHA-1 hash of
■
all
■ [no] password < all >
Usage: [no] password <manager|operator|port-access|all>
Description: Set or clear local password/username for a given access level.
Parameters:
o <manager|operator|port-access|all> - Level of access.
o user-name ASCII-STR - Username (up to 16 characters).
o <plaintext|sha1> ASCII-STR - Format for the password entry, and
Supported Values:
■ all -- Configure all available types of access.
password
■ password < operator | manager > user-name USER-NAME plaintext PASSWORD
Set password
■ password < operator | manager > user-name USER-NAME sha0 PASSWORD
Set password
■ password < operator | manager > user-name USER-NAME sha1 PASSWORD
© 2009 Hewlett-Packard Development Company, L.P.
[user-name ASCII-STR] [<plaintext|sha1> ASCII-STR]
Invoked without 'no', the command sets or changes existent
password(s). If no password provided in the command, the user
will be prompted to enter the new password twice. The command
removes specific local password protection, if preceded by 'no'.
the password itself (up to 16 characters). 'plaintext' is
default type, and the only type accepted for 'port-access'.
-- Set username for the specified user category. (ASCII-STR)
-- Enter plaintext password.(p. 390)
password.(p. 390)
password.(p. 390)
[user-name ASCII-STR] [<plaintext|sha1> ASCII-STR]
Invoked without 'no', the command sets or changes existent
password(s). If no password provided in the command, the user
will be prompted to enter the new password twice. The command
removes specific local password protection, if preceded by 'no'.
the password itself (up to 16 characters). 'plaintext' is
default type, and the only type accepted for 'port-access'.
password
(p. 391)
389