HP ProCurve 5400zl Reference Manual page 163

Command line interface, switch software
Hide thumbs Also See for ProCurve 5400zl:
Table of Contents

Advertisement

Command Line Interface Reference Guide
82
■ [no] dhcp-relay option 82
Optional argument to dhcp-agent used to specify the operational status
for option 82.
Next Available Options:
append
replace
-- Specifies that any existing option 82 fields will be replaced with switch option 82
field for client DHCP
keep
-- Specifies that no option 82 field will be added or replaced, if option 82 field(s) already
exists in the client DHCP
drop
-- Specifies that the DHCP packet will be dropped unconditionally, if option 82 field(s)
already exists in the client DHCP
validate
append
■ dhcp-relay option 82 append
Specifies that the option 82 field should be appended to client DHCP
packet.
Next Available Options:
validate
mac
-- Sets the remote id to be the MAC address of the switch. This is the default
ip
-- Sets the remote id to be the IP address of the VLAN on which the client request was
received.(p. 162)
mgmt-vlan
■ dhcp-relay option 82 validate append
Specifies that the option 82 field should be appended to client DHCP
packet.
Next Available Options:
mac
-- Sets the remote id to be the MAC address of the switch. This is the default
ip
-- Sets the remote id to be the IP address of the VLAN on which the client request was
received.(p. 162)
mgmt-vlan
drop
■ dhcp-relay option 82 drop
Specifies that the DHCP packet will be dropped unconditionally, if
option 82 field(s) already exists in the client DHCP packet.
Next Available Options:
validate
mac
-- Sets the remote id to be the MAC address of the switch. This is the default
ip
-- Sets the remote id to be the IP address of the VLAN on which the client request was
received.(p. 162)
© 2009 Hewlett-Packard Development Company, L.P.
-- Specifies that the option 82 field should be appended to client DHCP
packet.(p. 164)
packet.(p. 163)
-- Specifies the validation for server
-- Specifies the validation for server
-- Sets the remote id to be the IP address of the Management
-- Sets the remote id to be the IP address of the Management
-- Specifies the validation for server
packet.(p. 161)
response.(p. 165)
response.(p. 165)
response.(p. 165)
dhcp-relay
packet.(p. 161)
value.(p. 163)
VLAN.(p. 163)
value.(p. 163)
VLAN.(p. 163)
value.(p. 163)
161

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 3500ylProcurve 8200zl6200yl

Table of Contents