Startup-Default - HP ProCurve 5400zl Reference Manual

OVERVIEW
Category:
Primary context:
Related Commands
Usage: startup-default [<primary|secondary>] config FILENAME
Description: Set the default configuration file.
NOTES
Italicized "config" Keywords
The italicized "config | config1" keywords correspond to the names selected for the config
files.
COMMAND STRUCTURE

■ startup-default

■ startup-default
config < config | config1 > -- Specify configuration file to set as default.
■
COMMAND DETAILS
config (p. 657)
config
■ startup-default < primary | secondary > config < config | config1 >
Specify configuration file to set as default.
Supported Values:
■ config
■ config1
■ startup-default config < config | config1 >
Specify configuration file to set as default.
Supported Values:
■ config
■ config1
image
■ startup-default < primary | secondary >
Supported Values:
© 2009 Hewlett-Packard Development Company, L.P.
manager
manager
show config (page 540)
show flash (page 552)
file may be set as the default for each software image, or a
single configuration file may be set as the default when
booting either image by omitting the optional 'primary|secondary'
parameter.
config < config | config1 > -- Specify configuration file to set as default.
image < primary | secondary > --
image (p. 657)
startup-default
A separate configuration
(p. 657)
(p. 657)
(p. 657)
657